New Fascias and Guttering Near Me: Ultimate 2024 Guide

Roofline Protection 101: New Fascias and Guttering That Stop Water Damage

Answer: Replace failing fascias and gutters as soon as you see rot, sagging, or leaks; modern aluminum or uPVC systems typically protect a home for 30–50 years. When searching for new fascias and guttering near me, it’s crucial to work with a team that treats the roofline as an integrated water-management system—not just decorative trim. The sheer volume of water a roof must handle is staggering. One inch of rain on a modest 1,000‑sq‑ft roof produces about 623 gallons of runoff. For a larger 2,500-sq-ft roof, that’s over 1,550 gallons of water that must be captured, controlled, and diverted safely away from your home’s foundation. This isn’t just a recommendation; it’s a mandate for structural integrity. The International Residential Code (IRC) section R903.4 explicitly requires roof drainage on sloped roofs to prevent water from accumulating against the structure and causing damage.

For homeowners seeking expert fascia and guttering installation in the Sugar Land area, understanding this system is the first step toward a lasting solution. A properly functioning roofline does more than keep you dry; it actively protects your home from a cascade of expensive problems, including foundation erosion, basement flooding, landscape washout, siding rot, and even mold growth within your walls. This guide answers the key questions up front and shows you how to hire with confidence.

Sources: USGS rainfall calculation; IRC R903.4 roof drainage.

Executive Summary: New Fascias and Guttering Facts

• The Roofline System: An interconnected group of components including fascias, soffits, gutters, and downspouts designed to protect the roof’s edge and manage rainwater.
• Fascias: The horizontal boards attached to the rafter ends. They support the weight of the gutters (and the water within them) and seal the gap between the roof and the walls.
• Soffits: The panels that cover the underside of the roof’s overhang. Vented soffits are critical for attic ventilation, helping to regulate temperature and prevent moisture buildup.
• Gutters: The channels that collect rainwater from the roof’s edge.
• Downspouts: The vertical pipes that carry water from the gutters down to the ground, directing it away from the foundation.
• Average Replacement Cost: $1,500-$7,500 for a complete replacement, depending on materials, home size, and complexity.
• Common Materials: Wood ($1-$4/ft), Vinyl/uPVC ($4-$9/ft), Aluminum ($7-$21/ft), Steel ($8-$25/ft), Copper ($30-$100+/ft).
• Expected Lifespan: 20-50+ years, highly dependent on material choice and local climate conditions.
• Warning Signs: Sagging, leaking, peeling paint, water stains on siding, and evidence of pests are all indicators of system failure.
• Top Contractors: Look for licensed and insured roofers with extensive local references, strong material and labor warranties, and a deep understanding of local building codes.

Damaged fascias are a gateway for water infiltration, exposing your roof’s underlying structure to moisture. This can lead to rot in the rafter tails and roof decking, turning a straightforward roofline replacement into a major structural repair project. While a minor fascia and soffit repair might seem tempting at $300 to $1,500, a full replacement is almost always the most cost-effective and protective solution for aging or systematically failing systems.

I’m Andre Castro, CEO of Sienna Roofing & Solar. Over the past five years, I’ve personally overseen hundreds of new fascias and guttering installations across the Houston Metro area. My hands-on approach ensures every project we undertake is engineered not just for curb appeal, but for maximum long-term protection against the unique challenges of our Texas climate, from intense sun to torrential downpours.

Related reading:

• new roof installation
• roof replacement estimate

References:

• USGS: How much water falls during a storm? https://www.usgs.gov/special-topics/water-science-school/science/how-much-water-falls-during-storm
• IRC R903.4 Roof drainage: https://up.codes/viewer/irc-2021/chapter/9/roofs#R903.4

7 Evidence‑Based Signs You Need New Fascias and Guttering Now

Answer: If you observe sagging gutters, rotting fascia boards, or water staining on your home’s exterior walls, you should schedule a professional roofline inspection and likely replacement within the season. Delaying action allows water intrusion to cause progressive, and often hidden, structural damage. The financial stakes are high; according to FEMA, even one inch of floodwater inside a home can lead to an astonishing $25,000 in damages. A failing gutter system creates a localized flood against your foundation every time it rains.

Here are the seven key evidence-based signs that your roofline system is failing and requires immediate attention:

1. Peeling, Flaking, or Bubbling Paint: On wooden fascias, paint is the first line of defense. When it begins to peel or flake, it’s a definitive sign that the moisture barrier has been breached. Water is seeping into the wood, causing it to swell and push the paint away. This is the initial stage of rot. Once the wood is exposed, it absorbs moisture like a sponge, accelerating decay and weakening its ability to support the gutters.

2. Visible Cracks or Fissures: Cracks compromise the integrity of any material. In wood, they are direct pathways for water and insects. In vinyl (uPVC), cracks often indicate the material has become brittle from age and UV exposure, meaning a small impact could cause a large section to shatter. In aluminum, while less common, stress cracks can form near fasteners, creating a point of weakness.

3. Evidence of Pests, Birds, or Insects: A compromised fascia or soffit is an open invitation for pests. Squirrels and birds can easily tear away at softened, rotting wood to create nests. Carpenter bees drill perfect, damaging holes into exposed wood. Wasps and hornets build nests in the sheltered voids behind fascias. The presence of these animals indicates there are openings that also allow water to enter.

4. Water Stains or Discoloration on Siding: Dark, vertical streaks running down your siding below the roofline are a clear sign of overflowing gutters. This happens when gutters are clogged with debris or improperly sloped. Lighter, more diffuse stains directly behind the fascia or on the soffit itself often point to a leak in the gutter seams or a rotted fascia board wicking water into the surrounding structure.

5. Sagging Gutters or Gutters Pulling Away: Gutters should be perfectly straight and firmly attached to the fascia. If you see them bowing in the middle or pulling away from the house, it’s a serious failure. This can be caused by the sheer weight of water and debris in a clogged gutter, failed hangers, or—most commonly—a rotted fascia board that can no longer hold the mounting screws. A gallon of water weighs over 8 pounds, and a 40-foot gutter filled with water and wet leaves can weigh several hundred pounds, exerting immense force on the fascias.

6. Visible Wood Rot or Soft Spots: This is the most advanced sign of failure. Using a screwdriver or a similar tool, gently poke the fascia boards, especially near seams and corners. If the wood is soft, spongy, or crumbles easily, you have active rot. This is a non-negotiable sign that replacement is needed immediately, as the structural integrity is severely compromised.

7. Leaking Gutters and Water Pooling at the Foundation: During a rainstorm, observe your system in action. Water should flow smoothly through the gutters and exit only through the downspouts. If you see water cascading over the edges, dripping heavily from seams, or gushing from cracks, the system has failed. The most dangerous outcome is water pooling directly against your foundation. This saturated soil can exert hydrostatic pressure on your foundation walls, leading to cracks, leaks, and catastrophic structural failure over time.

A Homeowner’s Guide to a Safe Roofline Inspection

Inspect your roofline twice a year, ideally in the late fall after leaves have dropped and in the early spring to check for winter damage.

• From the Ground: Walk the entire perimeter of your home. Look for any of the seven signs listed above. Use binoculars for a closer look at second-story rooflines.
• Ladder Safety: If you choose to use a ladder for a closer inspection, prioritize safety. Ensure the ladder is on stable, level ground. Use a ladder stabilizer (standoff arms) to rest on the roof, not the gutters themselves. Always maintain three points of contact (two feet and one hand, or two hands and one foot) on the ladder. Have a spotter hold the base of the ladder. For more information on ladder safety, consult the CDC’s guidelines.
• Check the Gutters: From the ladder, look for debris, standing water (a sign of poor slope), and rusted spots in metal gutters.
• Check the Attic: Look at the underside of your roof decking from inside the attic. Water stains, mold, or damp insulation near the eaves are signs that the roofline system is failing and allowing water intrusion.

Reference: FEMA/ FloodSmart—The Cost of Flooding: https://www.floodsmart.gov/cost-of-flooding

Best Fascia & Gutter Materials: Wood vs Vinyl vs Aluminum (Costs & Lifespans)

Choosing the right material for your new fascias and guttering near me project is the most critical decision you’ll make. It directly influences the project’s upfront cost, long-term durability, maintenance requirements, and the overall aesthetic of your home. Here’s a detailed breakdown of the most common materials, including premium options, to help you make an informed choice.

Wood Fascias and Guttering

Wood offers a timeless, classic aesthetic that is often required for historical homes or desired for its ability to be painted to perfectly match any exterior color scheme. Common wood choices include cedar and redwood, which have natural resistance to rot and pests, and less expensive pine, which must be chemically treated (pressure-treated) and meticulously primed and painted for protection.

• Cost: $1-$4 per linear foot (material only). Pine is at the low end, while cedar and redwood are more expensive.
• Lifespan: 20-30 years, but only with diligent and consistent maintenance.
• Pros: Traditional, high-end look; fully customizable with paint.
• Cons: Extremely high maintenance. In the humid Texas climate, wood fascias require scraping, sanding, and repainting every 3-5 years to prevent moisture intrusion. They are highly susceptible to rot, warping, and pest damage (termites, carpenter ants) if maintenance is neglected.

uPVC/Vinyl Fascias and Guttering

Vinyl, specifically unplasticized polyvinyl chloride (uPVC), is the modern champion of low-maintenance solutions. It’s an engineered plastic that is impervious to moisture, rot, and insects, making it a popular “set it and forget it” choice for busy homeowners. Unlike wood, it never needs to be painted or sealed.

• Cost: $4-$9 per linear foot.
• Lifespan: 20-40 years.
• Pros: Very low maintenance, resistant to rot and pests, affordable, and available in various colors.
• Cons: Can become brittle with age and extreme cold, limiting its impact resistance. Colors can fade over time with prolonged, direct sun exposure, although modern formulations include UV inhibitors to slow this process. It offers a less traditional aesthetic that may not suit all home styles.

Aluminum Fascias and Guttering

Aluminum is the premium choice for most residential applications, offering an ideal balance of durability, low maintenance, and cost-effectiveness over its long lifespan. Fascia is typically protected with aluminum cladding, a thin sheet of pre-finished aluminum custom-bent to cover the underlying wood fascia board. Gutters are often “seamless aluminum,” extruded on-site to the exact length needed, minimizing leak-prone seams.

• Cost: $7-$21 per linear foot.
• Lifespan: 30-50 years.
• Pros: Extremely durable, rust-proof, lightweight yet strong, and requires virtually no maintenance. The factory-applied finish is exceptionally long-lasting and comes in a wide array of colors. It will not warp or rot.
• Cons: Higher initial cost compared to wood and vinyl. While strong, it can be dented by heavy impacts, such as a falling tree limb or improperly placed ladder.

Steel Fascias and Guttering

Steel offers superior strength and is a great option for climates with heavy snow and ice loads, or where maximum rigidity is desired. Galvanized steel is coated with zinc, while Galvalume steel is coated with an aluminum-zinc alloy for enhanced corrosion resistance. It’s heavier and more difficult to install than aluminum.

• Cost: $8-$25 per linear foot.
• Lifespan: 25-40 years.
• Pros: Exceptionally strong and rigid, holds up well to extreme weather.
• Cons: Can rust if the protective coating is scratched. It is significantly heavier than aluminum, requiring more robust fastening. Installation is more labor-intensive.

Copper Fascias and Guttering

Copper is the ultimate luxury material, chosen for high-end custom homes and historic restorations where both beauty and unparalleled longevity are paramount. It is a lifetime investment that develops a distinctive and beautiful blue-green patina over time.

• Cost: $30-$100+ per linear foot.
• Lifespan: 60-100+ years.
• Pros: Unmatched durability and lifespan. Will never rust. Creates a stunning, high-end architectural feature. The patina provides a natural, self-protecting layer.
• Cons: Extremely high initial cost. Requires specialized, skilled labor for installation as soldering is often required.

Material Comparison at a Glance

The best material depends on your budget, your home’s style, and your tolerance for maintenance. For most homeowners in the Sugar Land area, aluminum offers the best long-term performance and value. During a consultation, we can assess your property and help you decide which material best suits your home and budget. For more on the science behind plastics, you can learn the technical differences between PVC and uPVC.

From Tear‑Off to Downspouts: The 7‑Step Replacement Process

Answer: A professional fascia and gutter replacement on a typical single‑family home is a systematic process that usually takes 1–3 working days. A trained crew follows a precise sequence to ensure a durable, watertight, and code‑compliant installation. Understanding these steps helps you appreciate the quality and detail involved in a professional job.

1. Safety Setup and Site Preparation: The project begins with safety. The crew erects sturdy scaffolding, ladders with stabilizers, or deploys lifting equipment, adhering strictly to OSHA safety regulations to protect both the workers and your property. The ground area below the work zone is protected with tarps to catch debris and protect landscaping, and the site is secured.

2. Careful Removal of Old Materials: The existing gutters, downspouts, fascias, and soffits are carefully detached and removed. A professional crew takes care to not damage the roof shingles, siding, or windows during this tear-off phase. This step is crucial as it reveals the true condition of the underlying wooden structure (the rafter tails).

3. Thorough Rafter End Inspection and Repair: This is the most critical diagnostic step. With the old materials gone, each rafter tail is meticulously inspected for signs of rot, water damage, or pest infiltration. Any wood that is soft, discolored, or compromised is repaired or replaced. Minor rot might be treated with an epoxy consolidant, but significant damage requires cutting back the rotted section and sistering on a new, solid piece of wood. This ensures the new fascia boards have a solid, structural foundation to attach to. Skipping this step is a common shortcut of low-bid contractors and guarantees premature failure of the new system.

4. New Soffit Installation for Proper Ventilation: New soffits are installed along the underside of the roof’s overhang. This is a prime opportunity to improve attic ventilation. We strongly recommend and install vented soffits, which allow cool, fresh air to enter the attic. This intake airflow works with exhaust vents (like ridge or gable vents) to create a continuous cycle that pushes out hot, moist air. Proper ventilation, as defined by the 1/300 rule (1 sq. ft. of net free vent area for every 300 sq. ft. of attic floor space), prevents moisture buildup, reduces summer cooling costs, and prevents ice dams in colder climates.

5. Fascia Board and Drip Edge Installation: New fascia boards (or wood backing for aluminum cladding) are precisely measured, cut, and securely attached to the repaired rafter ends. A critical component installed at this stage is the metal drip edge. This L-shaped flashing is installed over the fascia board and underneath the edge of the roofing material. It directs water from the roof directly into the gutters, preventing it from running down the face of the fascia or, even worse, wicking behind it.

6. Gutter System Fabrication and Mounting: This step is a science. For seamless aluminum systems, a specialized machine on the truck extrudes a continuous piece of gutter to the exact length of each roof section. The gutters are then mounted using high-strength hidden hangers, which are screwed (not nailed) through the fascia and into the solid rafter tails for maximum strength. The system is installed with a precise slope—typically between 1/4 and 1/2 inch for every 10 feet—to ensure positive water flow towards the downspouts and prevent standing water. Downspouts are strategically placed and sized based on the roof area they serve to handle heavy rainfall without overflowing.

7. Final Cleanup, Sealing, and Walkthrough: A professional job concludes with a professional cleanup. All old materials and project debris are loaded and hauled away. The work area is swept, and landscaping is checked. A magnetic roller is often used to pick up any stray nails or screws. All seams, end caps, and corners of the gutter system are sealed with a high-grade sealant. Finally, the crew chief conducts a final walkthrough with you, the homeowner, to inspect the finished work and answer any questions.

When Should You Replace Gutters with Fascias?

It is almost always recommended to replace these components together. Here’s why:

• System Interdependence: Leaking gutters are a primary cause of fascia rot. Rotted fascias cause gutters to detach. They fail together, so they should be replaced together.
• Shared Lifespan: If your fascias and gutters were installed at the same time, they are made of materials with similar lifespans and have endured the same weather conditions. It’s highly likely they are both at the end of their service life.
• Aesthetic and Functional Mismatches: Installing new, perfectly straight aluminum gutters on old, wavy, or painted wood fascias looks unprofessional and can compromise the gutter installation. Upgrading materials often requires a complete system approach.
• Significant Cost Savings: The labor costs for setup, tear-off, and installation are largely the same whether you’re doing one component or both. Bundling the project into a single job dramatically reduces the total labor cost compared to two separate projects.

An integrated fascia and gutter replacement is a holistic solution that protects your home far more effectively than piecemeal repairs. You can learn more about our guttering replacement services to see how a complete system overhaul provides superior, long-term protection.

How to Hire the Right Fascia & Gutter Pro (Checklist That Saves You Money)

Answer: The single most important factor in a successful roofline project is the quality of your contractor. Choose a licensed, fully insured contractor with a portfolio of documented local references and comprehensive written warranties for both labor and materials. Roofline work is inherently dangerous. The CDC notes that falls remain a leading cause of unintentional injury nationwide, and ladder-related incidents result in over 500,000 treatments and about 300 fatalities annually in the U.S. Never entrust this high-risk work to an uninsured or inexperienced handyman.

Why a Professional Installation is Worth Every Penny

• Deep Expertise: Professionals understand the science of water management and how different materials perform in the demanding Texas climate. They can diagnose hidden structural issues that a DIYer or handyman would miss.
• Superior Workmanship: Skills like calculating proper gutter slope, custom-bending aluminum cladding, and correctly installing flashing are honed over years of experience. This craftsmanship is the difference between a system that lasts 5 years and one that lasts 30.
• Access to Pro-Grade Materials: Contractors have access to thicker gauge metals, better sealants, and stronger fasteners than what is typically available at a big-box retail store.
• Ironclad Warranties: A reputable contractor provides a labor warranty that protects you from installation defects. This is in addition to the manufacturer’s warranty on the materials. A handyman’s “warranty” is often only as good as their phone number.
• Safety and Liability: A professional company carries full general liability and worker’s compensation insurance. If an accident happens on your property, their insurance covers it, not your homeowner’s policy.
• Efficiency and Compliance: An experienced crew can complete a full replacement in a few days, minimizing disruption. They also handle all necessary permits and ensure the work is compliant with local building codes.

The Ultimate Contractor Vetting Checklist

Before you sign any contract, ask these crucial questions. The answers will reveal the difference between a true professional and a risk.

• “Are you licensed and insured? Can I have a copy of your insurance certificates?”
  Good Answer: “Yes, we are fully licensed and carry both general liability and worker’s compensation insurance. I can have our agent email you the certificates directly.”
  Red Flag: Any hesitation, or only claiming to have “liability” insurance (which doesn’t cover their workers if they get hurt).

• “How long have you been in business under this name in this area?”
  Good Answer: “We’ve been serving the Sugar Land and Houston area for over 5 years.”
  Red Flag: A new company name, no local address, or an out-of-state license plate. Storm-chasing contractors often disappear when warranty issues arise.

• “Can you provide at least 3 local references from projects completed in the last year?”
  Good Answer: “Absolutely. Here are the names and numbers of three recent clients. Feel free to call them and ask about their experience.”
  Red Flag: Vague promises, references from years ago, or an unwillingness to provide contact information.

• “Who will be performing the work? Are they employees or subcontractors?”
  Good Answer: “We use our own dedicated, factory-trained crews. The foreman, Juan, has been with us for years.”
  Red Flag: Uncertainty about who will show up. Heavy use of subcontractors can lead to accountability and quality control issues.

• “What specific materials do you recommend for my home, and why?”
  Good Answer: A detailed explanation of the pros and cons of different materials as they relate to your home’s style, your budget, and the local climate.
  Red Flag: Pushing only one material without a clear justification, or recommending the cheapest option without explaining the long-term risks.

• “What are your warranties on labor and materials?”
  Good Answer: “The aluminum materials come with a 50-year manufacturer’s warranty, and we provide a 10-year warranty on our labor.”
  Red Flag: A verbal promise, or a warranty that is not in writing and clearly detailed in the contract.

• “Will you provide a detailed, itemized quote? Is waste removal included?”
  Good Answer: “Yes, our quote will break down the costs for materials, labor, and disposal. A complete cleanup and haul-away are always included.”
  Red Flag: A single lump-sum price with no details. This is how contractors hide substandard materials or plan to hit you with surprise charges later.

Reference: CDC/NIOSH—Falls and ladder safety: https://www.cdc.gov/niosh/topics/falls/

2024 Cost Guide: Fascia and Gutter Replacement (What Homeowners Actually Pay)

Answer: In 2024, most homeowners will pay between $1,500 and $7,500 for a full professional fascia and gutter replacement. The final cost is influenced by four main factors: the linear footage of your roofline, the material you choose, labor rates in your area, and the complexity of the job.

Here’s a detailed breakdown of the cost factors:

• Material Choice: This is the largest variable. As detailed earlier, costs per linear foot range from $1-$4 for wood to over $30 for copper. For a 200-foot project, the material cost alone could be $400 for pine or $6,000 for copper.
• Labor Costs: Professional labor for a full replacement typically ranges from $1,000 to $2,500. This reflects the skilled work of removal, inspection, repair, and installation, as well as safety equipment and insurance costs.
• House Size and Design: A single-story, 1,500 sq. ft. ranch-style home might have 150 linear feet of fascia. A two-story, 3,000 sq. ft. colonial with a complex roofline could have over 250 linear feet. More footage means more materials and more labor.
• Project Complexity & Hidden Damage: The initial quote is based on what’s visible. If the tear-off reveals significant rot in the rafter tails or roof decking, repairs will be necessary at an additional cost. This is why a contingency fund is always wise.

Sample Project Costs (Estimated)

Scenario 1: Small Single-Story Ranch House

• Linear Feet: 160
• Vinyl/uPVC System: $2,000 – $3,500
• Aluminum System: $3,000 – $5,000

Scenario 2: Large Two-Story Home

• Linear Feet: 250
• Vinyl/uPVC System: $3,500 – $5,500
• Aluminum System: $5,000 – $7,500+

Potential Add-On Costs to Consider

A transparent quote will itemize these, but be aware of potential extra charges:

• Rotted Rafter Tail Repair: $50 – $150 per tail.
• Rotted Soffit/Decking Replacement: $5 – $10 per square foot.
• Multi-Story Work: Expect a 20-40% surcharge on labor for the additional safety equipment and time required for second or third stories.
• Gutter Guards/Screens: A popular upgrade to reduce maintenance. Costs range from $3/ft for simple screens to $15+/ft for premium reverse-curve systems.
• Permit Fees: Your municipality may require a permit, typically costing $50 – $200.

How to Save Money Without Cutting Corners

• Schedule During the Off-Season: In Texas, the busiest season is spring and summer. Booking your project in the late fall or winter can sometimes result in more competitive labor rates due to lower demand.
• Bundle with Other Exterior Work: If you’re also considering a new roof or exterior painting, doing it all with one contractor can lead to significant package discounts on labor and project management.
• Choose Materials for Long-Term Value: Don’t just look at the upfront price. Aluminum’s higher initial cost is often fully recovered over its lifespan because you’ll avoid the recurring cost of painting wood fascias every few years.
• Perform Preventive Maintenance: Once your new system is installed, keep it clean. Removing debris twice a year prevents clogs and extends the life of your system, saving you from premature replacement costs. Many companies offer affordable annual maintenance plans.
• Ask About Financing: A high-quality roofline system is a significant investment. Reputable companies like Sienna Roofing & Solar often offer flexible financing options that allow you to get the best quality materials and installation for a manageable monthly payment.

Conclusion: Safeguard Your Roofline and Foundation for Decades

Investing in new fascias and guttering near me is one of the most critical preventative maintenance projects a homeowner can undertake. It is not a cosmetic upgrade; it is an investment in structural risk prevention. Your roofline is the first and most important line of defense against water intrusion, managing thousands of gallons of stormwater during a single heavy rainfall to protect your foundation, walls, and attic from costly damage.

As we’ve detailed, acting on early warning signs like peeling paint, water stains, or sagging gutters is essential to prevent minor issues from escalating into major structural repairs. The key to a successful, long-lasting project lies in a systematic approach: choosing durable, low-maintenance materials like aluminum; ensuring a thorough inspection and repair of the underlying structure; and, most importantly, hiring a qualified, insured, and reputable professional installer. The craftsmanship of the installation is just as important as the quality of the materials.

This is not a project for cutting corners or choosing the lowest bidder without careful vetting. A professional installation by an experienced local company guarantees your system is built to withstand the Texas climate, complies with all building codes, and is backed by meaningful warranties. This provides a level of security and peace of mind that a DIY job or a handyman special simply cannot match. A new, high-performance roofline system also significantly boosts your home’s curb appeal and can be a strong selling point, demonstrating to potential buyers that the home has been well-maintained.

For homeowners in Sugar Land and the greater Houston area, Sienna Roofing brings over five years of dedicated local expertise to every project. We stand by our work with a 100% satisfaction guarantee because we understand that we’re not just installing gutters; we’re protecting your most valuable asset.

Ready to secure your home against water damage? If your fascias and gutters are showing their age, don’t wait for the next storm. Contact us today for a free, no-obligation inspection and a detailed quote on your project!